Daily maintenance and maintenance of filter press

After the operation of the filter press, a small amount of filter slag will remain. The first thing to note is that before cleaning, we need to understand the properties of the filter cloth filtrate, in order to choose the corresponding cleaning method.

Filter press and its role and application industry In these industries need filtration, filter press is one of its indispensable equipment. Xiaobian for everyone to analyze the working process and working mode of the filter press, as well as the press chain. So tomorrow I'll show you a little bit about it and what it does and where it's used. First of all, the importance and usefulness of filter press equipment lies in the realization of rapid, large-scale, high-speed separation between solid and liquid.

Which parts of the box filter press are developed for precision and invented in the industrial manufacturing of filtration equipment, the box filter press is a simple and convenient filtration equipment, mainly used for industrial research and development design. As a relatively simple industrial equipment, there are not many parts with high technical competitiveness. Therefore, for the box filter press, the precision parts manufactured become the automatic control system of the box filter press.

Filter press is a common solid-liquid separation equipment, which needs to be operated in strict accordance with the operating system. Once the filter press is improperly operated, it is easy to have various faults, which seriously affect the use effect and filtration effect of the filter press equipment. Therefore, it is very important to do the daily maintenance and maintenance of plate and frame filter press.

1. Maintenance and maintenance of the filter press:

(1) Carefully check whether the connection is firm and whether the parts are in good use.

(2) If not used for a long time, the press cloth and filter plate should be cleaned and dried in the sun.

(3) Disconnect the power supply when removing the module.

(4) Check bearing and piston rod parts, keep clean, good lubrication performance, to ensure that the moving parts are flexible.

(5) Insulation and reliability test of the electrical control system. If found abnormal, should be timely maintenance or replacement of electrical components.

(6) Carefully check the press cloth before pressing to ensure that there is no folding, no damage, smooth and intact, so as to ensure the filtering effect.

2. Maintenance and maintenance of hydraulic station:

(1) Each refueling needs to go through the filter.

(2) For the equipment that has been shut down for 1 hour, the pump must run for 10 minutes without load before starting the actuator.

(3) Often check pipe joints, screws and other wearing parts.

(4) If the hydraulic oil in the tank is emulsified, it should be replaced in time.

(5) During the maintenance of hydraulic equipment, it is generally not allowed to remove the pump, valve and other major hydraulic components, which can be replaced after confirmation.